Topline Hy-lift Johnson Retro-Fit High RPM Hydraulic Roller Lifters are a great choice of aftermarket lifters to suit your LS Engine. Used and recommended by quality engine builders around the world for high rpm hydraulic roller LS engines. A-2148
Suits Non-AFM LS engines including 5.7 LS1, 6.0 LS2, 6.2 LS3, 7.0 LS7 and 6.0 L98. Can be used in AFM LS engines when carrying out a DOD delete.
Top Line Hy-Lift has been an automotive supplier for more than 100 years so you can trust the quality! They offer 100% American made hydraulic roller lifters for the LS and LT platforms
Note: Requires approx .175" longer push rod than stock pending base circle and valve job. .030" lifter preload
“S” or Slow Design: These parts have an “S” designation after their part number. So a Slow Design part number will look like A-0817S. These Lifters have a Leak Down on the upper end of the scale from 90 to 120 seconds. In a performance application these lifter will actually act like a mechanical lifter with very little effective loss of valve lift or duration at any RPM. Just like the “R” Lifters these have a much smaller Leak Down range that will also balance all of the cylinders to each other. These lifters are very hard to produce because the TOTAL clearance between the I.D. of the Body and the Piston assembly is reduced to less than 0.000120”, or 1/30 of a human hair. These are like super heavy duty shocks and can handle higher spring pressures without collapsing like the standard and “R” lifters. The only draw back of this type of lifter is that if the valve train should “Float” because of reaching a higher RPM than the valve springs can handle these lifters will try to take up the excessive clearance causing the valve to hang open resulting in a loss of power. Because these are Hydraulic lifters there is no lash or additional adjustment needed and the full cam profile is translated to the valves. In testing, not only did these lifters result in more power and higher RPM reading over other Hydraulic lifters they also reduced valve train wear and failure compared to mechanical lifters. hylift a-2348s